"Unfortunately," started broadcasting in the third quarter, and opened the smart TV correctly

On November 3rd, the "Internet drama" jointly produced by Youku and Wanhe Tianyi jointly produced a limited edition "Never Expected" in the third quarter of Youku.com. In the third quarter, the counterattack, incarnation of the emperor, successfully embarked on the pinnacle of life.


In the first episode of today's update, Wang Sham finally got rid of the “Royal Reel” status, and he appeared in the Ninth Five-Year Reign when he appeared. In order to find the hope of civilian-like love, the emperor sledgehammer did not hesitate to hide his identity, micro-service patrol, and fell in love with the summer rain on Daming Lake. After experiencing a series of unsteady micro-services, unrequited love, and the replacement of the throne, whether the King Sledgehammer can still obtain the civilian-like love according to what he thinks...

In addition to the more exciting storyline, the limited edition "Not expected" in the third quarter also opened the barrage mode for the first time. As fans' favorite dramas, “Unfortunately,” the third quarter of the Barrage model opened, it evoked a fan of interactive boom, Tucao, leaving messages, showing love, “Hammer, I want to give you Monkey!", "Not very good-looking, I also watched twenty or so times.", "I really want to hurry to see big movies." Messages like this are once full screen ... ... want to see a friend quickly Turn on the smart TV and watch the latest "The Third Quarter Never Expected" on the big screen TV through the sofa butler.

You can't watch Youku directly on your smart TV, you can use pudding video to watch it. Open the sofa butler, enter "BDSP" in the search, you can search for genuine free pudding video, download and install.



Download and install the pudding video, open the pudding video, and the homepage recommendation bit will be able to watch the third quarter of “Unforgettable”.

3D printing on the pen machine is mainly used in 3 d printing pen, is made from a special custom Dc Gear Motor, mainly used in 3 d printing pen, pen 3 d printing machine has been updated three generations according to the requirements of product.


3D Printing Motor product introduction:

The 3D Printing Motor is based on the deceleration Motor, coupled with supporting gears and ball bearings.The role of the gear reducer is to provide lower speed and greater torque.At the same time, gear box different deceleration ratio can provide different speed and torque.It's mostly rolling.

3D Printing Motor

     3D Printing Motor3D Printing Motor




Features: 3D Printing Motor, small size, large torque, low noise, durable, low energy consumption, customized power design, convenient installation and maintenance;

Simplify design and save space.


Features: usually used financial equipment, office equipment, electronic locks, wireless charger, remote control toys, precision instruments and meters, automobile industry, medical equipment, consumer electronics, household appliances, electric glass doors and Windows, etc., wide application range


Method of use: the best stable in horizontal plane, installed on the 3D Printing Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the 3D Printing Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.

3D Printing   3D Printing



Operating temperature range:

3D Printing Motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a 3D Printing Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.


Storage temperature range:

3D Printing Motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.


Service life:

The longevity of 3D Printing Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.

●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.


when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.

3D Printing Motor

3D Printing Motor

3D Printing Motor,3D Printing Gear Motor,3D Printing Pen Motor,3D Printing Spindle Motor

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com