There are several factors to take into account when it comes time to purchase electric Bow Mount Trolling Motor, the most significant of which is the motor’s size and power. You need to make sure that you purchase a large enough motor for your boat as an engine that is too small with leave you dead in the water. Aluminum boats are considerably lighter than their fiberglass counterparts. Keep in mind what sort of boat you have when making this decision.
It is important to get a motor with enough thrust for the size of your boat. Many pros suggest buying as large a motor as your budget can stand. This is good advice generally, but it is possible to have more thrust than you will ever need, which wastes money and puts excess strain on your boat hull or transom.
If your boat is small, such as a 12-foot aluminum boat, a trolling motor with 30 to 36 pounds of thrust will be all you need. Boats in the 14- to 16-foot range will need a Motorguide Trolling Motor in the 32 to 56 pounds of thrust range. Larger boats need even more thrust, but with models available from 30 to 110 pounds of thrust matching the motor to the boat is easy. Fiberglass boats need a trolling motor on the higher end of the thrust range as they are substantially heavier than aluminum boats.
Consideration needs to be given to the type of fishing you do as well. If you are a casual fisherman who goes out for a few hours, a 12-volt trolling motor will work fine for you. If, however, you are a tournament fisherman using a fiberglass boat, you should use a 24- or 36-volt trolling motor because these motors offer a much longer time before the batteries are drawn down. A minimum suggested trolling motor for a 16-foot fiberglass bass boat would be a 56-pound, 24-volt motor.Two additional factors to consider are shaft length and whether to use a transom or bow mount trolling motor. Bow mounts offer the ultimate in control, especially the foot-controlled models, but are expensive and impractical for small aluminum boats where a transom mount model is a better choice. The length of the shaft is important, especially on bow mount models because the shaft must be long enough to allow the trolling motor to stay in the water at all times, but not be so long as to stick too high above the deck. Consult with the trolling motor salesman to determine the proper length shaft for your hull, but before you do, measure the distance from the top of your deck to the bottom of the hull.
If ypu are intersed in Trolling Motor Parts,please enter the following link: Trolling Motor Parts
